Warmup loose wire system provides the best flexibility of layout so are ideal for awkward shaped or smaller floor areas, they are usually installed beneath a tiled or stone floor finish but can be used beneath Vinyls when embedded within a suitable levelling compound.
Choose your cable system to cover around 95% of your open floor area.
You can also choose your thermostat from the thermostat choice menu.
Warm loose wire systems are 2mm in diameter, ultra-thin, dual-core heating element. The small cross-section of our element allows it to be installed in a matter of hours without raising floor levels.
There is no need to dig up the floor and no need to mix concrete. Simply fix the heating element to the subfloor, tile straight over and say goodbye to cold feet for good!
Please ensure all safety guidelines are adhered to during and after installation of this product.
Features
- Ultra-thin dual-core heating element wont raise floor levels
- Toughest and thinnest wire you can buy: 2mm, multi-strand core, double-insulated using advanced fluoropolymers
- ASTA BEAB approved heating element meets the highest safety standards
- Quick installation Single connection lead for fewer steps
- Available in both 120V and 240V
- Approvals: ASTA BEAB Component, CERTIF, KEMA, GS
- Lifetime warranty
- Warmup SafetyNet Installation guarantee
For smaller areas
DWS300 = Areas m2 – 1.5 to 1.8 =+ Spacing of cable 70mm for 150w ………. DWS300 = Areas m2 – 1.9 to 2.4 =+ Spacing of cable 90mm for 115w
DWS400 = Areas m2 – 2.5 to 2.7 =+ Spacing of cable 70mm for 230w ………. DWS400 = Areas m2 – 2.8 to 3.0 =+ Spacing of cable 80mm for 150w
DWS400 = Areas m2 – 3.1 to 3.4 =+ Spacing of cable 90mm for 115w ………. DWS600 = Areas m2 – 3.5 to 3.8 =+ Spacing of cable 70mm for 230w
DWS600 = Areas m2 – 3.9 to 4.1 =+ Spacing of cable 80mm for 150w ………. DWS600 = Areas m2 – 4.2 to 4.4 =+ Spacing of cable 70mm for 115w
DWS800 = Areas m2 – 4.5 to 5.0 =+ Spacing of cable 70mm for 230w ……….DWS800 = Areas m2 – 5.1 to 5.6 =+ Spacing of cable 80mm for 150w
DWS800 = Areas m2 – 5.7 to 5.9 =+ Spacing of cable 70mm for 115w
Some variations if a larger area is required – this is usually installed by sticky mat if required by loose cable see below for variations
For larger areas
DWS400 & DWS600 = Areas m2 – 6.0 to 6.4 =+ Spacing of cable 80mm for 150w……….DWS400 & DWS600 = Areas m2 – 6.5 to 6.9 =+ Spacing of cable 90mm for 115w
DWS600 & DWS600 = Areas m2 – 7.0 to 7.7 =+ Spacing of cable 80mm for 150w……….DWS600 & DWS600 = Areas m2 – 7.8 to 8.4 =+ Spacing of cable 90mm for 115w
DWS600 & DWS800 = Areas m2 – 8.5 to 9.2 =+ Spacing of cable 80mm for 150w……….DWS600 & DWS600 = Areas m2 – 9.3 to 9.9 =+ Spacing of cable 90mm for 115w
DWS800 & DWS800 = Areas m2 – 10.1 to 11.1 =+ Spacing of cable 80mm for 150w……….DWS800 & DWS800 = Areas m2 – 11.2 to 11.4 =+ Spacing of cable 90mm for 115w
DWS800 & DWS800 = Areas m2 – 10.1 to 11.1 =+ Spacing of cable 80mm for 150w……….DWS800 & DWS800 = Areas m2 – 11.2 to 11.4 =+ Spacing of cable 90mm for 115w
