Polypipe Double Heat Spreader Plate (Pack Qty 5)
For 15mm Pipe. 450mm span double indent
Pipe grooves at 125mm each side of centre line
Suspended Floor – Double Heat Spreader Plate
Designed for use in timber suspended or battened floors, the Polypipe suspended floor system uses aluminium double heat spreader plates to transmit the heat evenly across the finished floor surface.
Suitable for joist widths of 300mm to 450mm, the spreader plates are simply fixed to the joist using small nails or staples. The pipe is then run into the preformed grooves of the panels which are designed to hold the pipe securely at 225mm average centers.
A layer of insulation below the panels will ensure that almost all of the heat generated passes up into the room. The Polypipe suspended floor system is also suitable for use with “sprung” flooring systems as used in sports halls etc.
KEY DESIGN AND ILLUSTRATION INFORMATION | |
Maximum Heat Output | approx. 70W/m |
Recommended Design Flow Temperatures | 60°C |
Maximum Circuit Length | 80m (15mm pipe) 100m (18mm pipe) |
Maximum Coverage Per Circuit Single Heat Spreader Plates | 25m2 at 300mm centres (15mm pipe) 30m2 at 300mm centres (18mm pipe) |
Maximum Coverage Per Circuit Double Heat Spreader Plates | 17m2 at 225mm centres (15mm pipe |